Saturday, June 11, 2011

growth chart tutorial

Making this growth chart has been on my list for a VERY long time. I finally just did it. It was so easy, I don't know why I hadn't done it earlier.
Growing up we measured our growth on a door frame. I loved that door frame. The only sad part was when my parents moved and that history was gone....

So here's my solution. I can take it with me anywhere I may go.

So here's the step by step so you can make your own.

I bought a 1x8 6 feet long board at Home Depot for just under $5. When picking your board look for one that is not knobby and isn't bowed.

Paint your board and its' sides your choice of color. Be sure to choose a color that is light enough to write on so you can track growth easily.

Run your measuring tape the length of your painted board.

Decide at what height you want your board to start (since it will be hanging on the wall). I started mine at 11" so that the 1 for the first foot would fit on. From there mark each inch with a pencil. I marked the quarters, half and foot inches longer so I would know when adding my vinyl "tics".

I used straps of black vinyl that I had to cut "tics" for the inches. You can also cut your numbers out first and then use the vinyl around them to cut the "tics". Start with the smallest size tics. Then make them longer from there for the quarter, half inch, and foot marks.

After cutting your "tics" to mark each inch, stick them to the left side of your board. I started with all my "in between inches" (don't do the quarter inch, the half inch, or the foot-those will come after and be longer).

After doing all the "odd" inches, cut your next tics to do a little longer. These will be for your quarter inches.

Next cut your "tics" a little bit longer than the last for your half inches, and then a little longer for your foot.

After attaching all your inch "tics", add your numbers off to the right. I cut out different fonts and sizes to make it whimsical. That way, nothing has to be perfect. If it's not, it adds to the look.

Find where you want to hang your board. Measure so that our board is the correct distance from the floor (this tape measure is not correct, I was just showing that you should measure). Draw a pencil line so that you can use that as your guide. Then mark where you will want your nail.

Now hang at the correct height. Doesn't it look great!

2 comments:

  1. Your ruler looks great! I was going to do mine in white too but at the last moment went with a wood look. I've got yours linked to my oversized rulers growth charts post as well today, nice job!

    ReplyDelete
  2. Hi there! Stumbled across your blog and love it, especially love how your DIY growth chart turned out!
    A few months back I asked my husband to help me make one for our boys and we had fun preparing the board, but got stuck on creating a neat, professional way to put on numbers and tick marks. We tried numerous methods, and weren't happy with any of them, so decided to design a DIY vinyl decal that you can just transfer onto the board and were finally happy with it!
    Since then, knowing how popular this project is, we actually opened a shop on Etsy to sell the decals for other DIY-ers who wanted to make a board but didn't have the time or way to hand draw out or stencil numbers and tick marks. If you'd like to take a look, or recommend the shop in your post to others who might be frustrated by the same step as an option, it's: www.etsy.com/shop/LittleAcornsByRo
    Maybe it will be a help to others out there!
    Thanks and best wishes!
    Ro

    ReplyDelete